A-PK-F36ETVP04.A105-O

SPECIFICATIONS

Cycle	diesel – 4 stroke
Air charging system pattern	Turbocharged aftercooled
Number of cylinder	4
Configuration (cylinder arrangement)	in line
Bore mm	102
Stroke mm	110
Stroke / Bore	1,07
Displacement l	3,6
Unit Displacement l	0,9
Bore pitch mm	110
Valves per cylinder	4
Cooling system type	liquid
Direction of rotation (looking flywheel)	anti-clockwise
Compression ratio	18,5 : 1
Firing order	1 – 3 – 4 – 2
Injection type	direct – electronic common rail
Engine Weight – Dry (no fluids, value purely indicative) kg	542

STANDARD CONFIGURATION

Engine Rating	Power: 105kW@2300rpm ; Torque: 600Nm@1500rpm
Homologation	Tier 4B / Stage V
High pressure Pump	Bosch, CP 4.1 type
Fuel Pump	By gears, incorporated into the high pressure pump
ECU position	Bosch MD1 CS069 control unit mounted on engine block for transport only
Wiring harness	Engine harness connected to ECU
Control panel	Opzional
Cover valve	Aluminium
Flywheel housing	cast iron, SAE #3 RHS
Flywheel side	multi-centering 10” and 11” 1/2 SAE
Fan (Complete)	possibility to choose between a Intake fan or a Blowing fan
Radiator (complete)	Included
Protection and shield for fan pulleys and belts	Included
Radiator support	Included
Air filter (complete)	Included
A/C predisposition	Poly V on fan pulley
Belt Tensioner	Manual, with lever and alternator
Alternator Position/Type	Right side, Iskra 120A, 14V
Engine Starter Position /Type	right side, Mahle 12V – 4,2 kW
Turbo charger type	Fixed geometry with wastegate valve
Turbo charger position	High position, right side, back exhaust
Turbo CAC connection	Installed on the standard configuration
Water Temperature Sensor	Installed on the standard configuration
Dipstick	Left side, high, stif
Oil filter	Single cartridge, left side
Oil Fill Position	Left side on gear housing
Fuel Filter	Single cartridge, left side
Grid Heater	None
PTO	Optional
Air Compressor	None
Air conditioner compressor	Optional
Steering Pump	None
Interface wiring harness	Included
Engine Mounting	Included
Ad Blue Tank	43It
UREA PIPES	Included
ATS System Components	DOC + DPF + SCR-T mounted on the engine

[*] Power at flywheel according to 97/68 EC (without fan), after 50 hours running, 3% tolerance, Fuel Diesel EN 590.
[**] Oil type: Approved engine oil specification: 10W-40 ACEA E9 / API CJ-4 low SAPs or 5W-30 ACEA E6 (for ambient temperature below -25°C (-13°F)).
Test conditions: ISO 3046/1, 25 °C (77°F) air temperature, 100 kPa (14.5 PSI) atmospheric pressure, 30% relative humidity – Applicable also to DIN 6271,
BS 5514, SAE J1349 Standards.

OPTIONALS

Air conditioner compressor	Sanden type 130CC 12V belt drive, left side mounted
PTO	SAE A, 11 tooth, left side
PTO	SAE A, 13 tooth, left side
Ad Blue Tank	20 It 5802957768
Control panel	CAN VIEW4-S1 4”
Alternator	Alternator 12V 80A
Alternator	Alternator 65A – 12V
REMOTE FUEL FILTER
Oil filter remote
Oil extraction pump