A-PK-N67ENTVP20.00-O

SPECIFICATIONS

Cycle	diesel – 4 stroke
Air charging system pattern	Turbocharged aftercooled
Number of cylinder	6
Configuration (cylinder arrangement)	in line
Bore mm	104
Stroke mm	132
Stroke / Bore	1,27
Displacement l	4,5
Unit Displacement l	1,12
Bore pitch mm	120
Valves per cylinder	4
Cooling system type	liquid
Direction of rotation (looking flywheel)	anti-clockwise
Compression ratio	17 : 1
Firing order	1 – 5 – 3 – 6 – 2 – 4
Injection type	direct – electronic common rail
Engine Weight – Dry (no fluids, value purely indicative) kg	752

STANDARD CONFIGURATION

Engine Rating	Power: 212kW@2200rpm ; Torque: 1160Nm@1500rpm
Homologation	Tier 4B / Stage V
High pressure Pump	Bosch, CP3.3 type
Fuel Pump	By gears, incorporated into the high pressure pump
ECU position	Bosch MD1CE101 control unit mounted on engine block for transport only
Wiring harness	Engine harness connected to ECU
Control panel	Opzional
Cover valve	Aluminium
Flywheel housing	cast iron, SAE #3 RHS
Flywheel side	11” 1/2 SAE
Fan (Complete)	possibility to choose between a Intake fan or a Blowing fan
Radiator (complete)	Included
Protection and shield for fan pulleys and belts	Included
Radiator support	Included
Air filter (complete)	Included
A/C predisposition	gears
Belt Tensioner	Automatic, with steel pulley
Alternator Position/Type	Right side, Bosch 70A 24V
Engine Starter Position /Type	Right side, Bosch 24V 4kW
Turbo charger type	Wastegate valve with exhaust flap, high position
Turbo charger position	High position, right side, back exhaust
Turbo CAC connection	Not installed on the standard configuration
Water Temperature Sensor	Included
Dipstick	Left side
Oil filter	Single cartridge, left side
Oil Fill Position	Left side
Fuel Filter	Single cartridge, left side
Grid Heater	Optional
PTO	Optional
Air Compressor	Optional
Air conditioner compressor	Optional
Steering Pump	Optional
Interface wiring harness	Included
Engine Mounting	Included
Ad Blue Tank	43 It
UREA PIPES	Included
ATS System Components	DOC + SCRoF mounted on the engine

[*] Power at flywheel according to 97/68 EC (without fan), after 50 hours running, 3% tolerance, Fuel Diesel EN 590.
[**] Oil type: Approved engine oil specification: 10W-40 ACEA E9 / API CJ-4 low SAPs or 5W-30 ACEA E6 (for ambient temperature below -25°C (-13°F)).
Test conditions: ISO 3046/1, 25 °C (77°F) air temperature, 100 kPa (14.5 PSI) atmospheric pressure, 30% relative humidity – Applicable also to DIN 6271,
BS 5514, SAE J1349 Standards.

OPTIONALS

Air conditioner compressor	Sanden type 154,9CC 24V belt drive, left side mounted A81000513
PTO	SAE A, 9 tooth, left side
PTO	SAE B, 13 tooth, left side
PTO	SAE A, 11 tooth, left side
Air compressor	KNORR-BREMSE 225cc, single-cylinder compressor without ESS
Air compressor	KNORR-BREMSE 360cc, single-cylinder compressor without ESS
HYDRAULIC PUMP	Hydraulic pump capacity 16 cc rpm Bosch
Control panel	CAN VIEW4-S1 4”
REMOTE FUEL FILTER
Oil filter remote
Grid heater	Air pre-heating coil 24V